Stairs are one of the few parts of a house that you use every day without thinking about them, until they are uncomfortable, noisy or dangerous. Concrete stairs are a common choice in new houses and larger renovations because they are solid, quiet underfoot and can be finished in many different ways. They are also difficult to change once built, which is why good planning matters.
Why choose concrete stairs?
Compared with timber or steel stairs, a concrete staircase has several practical advantages:
- it is very stable and does not creak or flex
- it carries sound less than lightweight stairs, which helps in homes with several floors
- it does not burn, which is an advantage in escape routes
- it can be covered with almost any finish, from natural stone to wood or tiles
- it can take many shapes: straight, with a landing, L-shaped or curved
The downsides are weight and flexibility. Concrete stairs need a supporting structure designed to carry them, and once they are cast, changing their position or shape is a major job. They are usually planned together with the floor slabs as part of the building's structure.
Comfortable and safe step dimensions
The comfort of a staircase depends mainly on the relationship between the height of each step, called the riser, and its depth, called the tread or going. Steps that are too high are tiring. Treads that are too short make people place their feet awkwardly, especially when going down.
A long-established rule of thumb says that two risers plus one tread should roughly match an average human stride, often given as around 60 to 65 centimetres. Within a staircase, all steps should have the same height and depth, because people quickly get used to a rhythm and trip when one step is different. This is especially important at the top and bottom of the flight, where differences often creep in because of floor finishes.
Other points to consider:
- Enough headroom along the whole flight, so taller people do not hit the ceiling or the edge of the slab above
- Width that suits the household and lets you carry furniture up and down
- Landings where the stairs turn or where a flight would otherwise be very long
- A sturdy handrail at a comfortable height, and a balustrade wherever there is a drop
Local building rules often set requirements for stairs and railings, so the final dimensions should be confirmed by the designer of the house.
How concrete stairs are built
Most concrete stairs in houses are cast in place. Carpenters build formwork in the exact shape of the stairs, steel reinforcement is placed according to the structural design, and concrete is poured and compacted. After the concrete has hardened enough, the formwork is removed. Precast stairs, made in a factory and lifted into place, are another option, particularly for simpler straight flights.
The single most important detail at this stage is the finished floor height. The rough concrete steps have to allow for the thickness of the future finish on each step and on the floors at the top and bottom. If the floor build-up changes later, for example because of thicker insulation or a different flooring, the first or last step ends up higher or lower than the others.
Finishing options
The finish defines how the stairs look and feel. Common choices include:
- Natural stone: durable, easy to clean and long-lasting. Treads and risers are cut to size, and the surface can be polished, honed or textured. For outdoor or wet areas, a non-slip surface is important.
- Wood: warm and quiet, often matched to parquet on the floors. Solid treads are fixed onto the concrete steps.
- Tiles: practical and available in many designs, with special step pieces or edge profiles to protect the nosings.
- Polished or exposed concrete: a minimalist look, which requires very precise formwork and careful protection during the rest of the construction.
Whichever finish you choose, protect the stairs during construction. They are used constantly by workers carrying heavy material, and damaged edges are hard to repair invisibly.
Plan the details early
Lighting along the stairs, sockets for cleaning, the fixing points for the handrail and any storage under the flight are easier to integrate before the concrete is poured. Conduits for wall lights or step lights can be placed into the formwork, while fixing a handrail later into finished stone needs careful drilling.
Construction S carries out construction work including concreting, as well as stone and finishing work, in Slovenia and Croatia. If you are planning stairs as part of a new house or renovation, contact us and we will help you work out the details.